Materials for printed boards and other interconnecting structures - Part 2-38: Reinforced base materials, clad and unclad - Non-halogenated epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
2008-11-26
IEC 62137-1-3:2008
Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-3: Cyclic drop test
2008-11-26
IEC 60689:2008
Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
2008-11-26
IEC 60689:2008
Measurement and test methods for tuning fork quartz crystal units in the range from 10 kHz to 200 kHz and standard values
2008-11-26
ISO/IEC 14165-122:2005+AMD1:2008 CSV
Information technology - Fibre channel - Part 122: Arbitrated loop-2 (FC-AL-2)
2008-11-26
IEC 61249-2-36:2008
Materials for printed boards and other interconnecting structures - Part 2-36: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminate sheets of defined flammability (vertical burning test), copper-clad for lead-free assembly
2008-11-26
IEC 60079-0:2007/ISH1:2008
Interpretation sheet 1 - Explosive atmospheres - Part 0: Equipment - General requirements
2008-11-26
IEC 60079-0:2004/ISH1:2008
Interpretation sheet 1 - Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
2008-11-26
IEC 60079-0:1998/ISH1:2008
Interpretation sheet 1 - Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
2008-11-26
IEC 60204-1:2005/AMD1:2008
Amendment 1 - Safety of machinery - Electrical equipment of machines - Part 1: General requirements
2008-11-26
IEC 61676:2002/AMD1:2008
Amendment 1 - Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology
2008-11-26
ISO 21614:2008
Determination of carbon content of UO2, (U, Gd)O2 and (U, Pu)O2 powders and sintered pellets — Combustion in a high-frequency induction furnace — Infrared absorption spectrometry
2008-11-26
ISO 23045:2008
Building environment design — Guidelines to assess energy efficiency of new buildings
2008-11-26
ISO/TS 13399-150:2008
Cutting tool data representation and exchange — Part 150: Usage guidelines
2008-11-26
ISO 6884:2008
Animal and vegetable fats and oils — Determination of ash
2008-11-26
ISO 21458:2008
Water quality — Determination of glyphosate and AMPA — Method using high performance liquid chromatography (HPLC) and fluorometric detection
2008-11-26
IEC 61883-8:2008
Consumer audio/video equipment - Digital interface - Part 8: Transmission of ITU-R BT.601 style digital video data
2008-11-25
IEC 61883-8:2008
Consumer audio/video equipment - Digital interface - Part 8: Transmission of ITU-R BT.601 style digital video data
2008-11-25
IEC 60297-3-100:2008
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets
2008-11-25
IEC 60297-3-105:2008
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-105: Dimensions and design aspects for 1U high chassis
