资质认证
- ISO 9475:1994
- Aircraft inner tube and tubeless tyre valves — Cores and caps — Test methods
- 1994-11-30
- ISO 11001-4:1994
- Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 4: Bar coupler
- 1994-11-30
- ISO 11173:1994
- Thermoplastics pipes — Determination of resistance to external blows — Staircase method
- 1994-11-30
- ISO 3105:1994
- Glass capillary kinematic viscometers — Specifications and operating instructions
- 1994-11-30
- ISO 3127:1994
- Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
- 1994-11-30
- ISO 9884-1:1994
- Tea sacks — Specification — Part 1: Reference sack for palletized and containerized transport of tea
- 1994-11-30
- ISO/IEC 2022:1994
- Information technology — Character code structure and extension techniques
- 1994-11-30
- ISO 8668-3:1994
- Aircraft — Terminal junction systems — Part 3: Detail specification for type 1 system
- 1994-11-30
- ISO 241:1994
- Shanks for turning and planing tools — Shapes and dimensions of the section
- 1994-11-30
- ISO 8691:1994
- Petroleum products — Low levels of vanadium in liquid fuels — Determination by flameless atomic absorption spectrometry after ashing
- 1994-11-30
- ISO 3914-3:1994
- Textile machinery and accessories — Cylindrical tubes — Part 3: Dimensions, tolerances and designation of tubes for tape yarns
- 1994-11-23
- ISO 3914-7:1994
- Textile machinery and accessories — Cylindrical tubes — Part 7: Dimensions, tolerances and designation of perforated tubes for cheese dyeing
- 1994-11-23
- ISO 832:1994
- Information and documentation — Bibliographic description and references — Rules for the abbreviation of bibliographic terms
- 1994-11-23
- ISO 11263:1994
- Soil quality — Determination of phosphorus — Spectrometric determination of phosphorus soluble in sodium hydrogen carbonate solution
- 1994-11-23
- ISO 3914-1:1994
- Textile machinery and accessories — Cylindrical tubes — Part 1: Recommended main dimensions
- 1994-11-23
- ISO 3914-2:1994
- Textile machinery and accessories — Cylindrical tubes — Part 2: Dimensions, tolerances and designation of tubes for open-end spinning machines
- 1994-11-23
- IEC 60061-2M:1994
- Twelfth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders
- 1994-11-22
- IEC 60061-3P:1994
- Fourteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges
- 1994-11-22
- IEC 60061-1Q:1994
- Fifteenth supplement - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1: Lamp caps
- 1994-11-22
- ISO/IEC 7498-1:1994
- Information technology -- Open Systems Interconnection -- Basic Reference Model: The Basic Model
- 1994-11-16
